Cleaning an Older Pittsburgh Home: Radiators, Plaster, Hardwood and Basements
A lot of Pittsburgh's housing stock is old. Brick rowhouses in Lawrenceville and Bloomfield, big foursquares in Highland Park and Squirrel Hill, and early twentieth-century homes in Mount Lebanon and Sewickley all have details you won't find in a new build.
Those details are a big part of why people love these houses. They also need a slightly different approach to cleaning. Here's what we've learned works, room by room.
Radiators
Cast-iron radiators collect a surprising amount of dust between the fins, and when the heat comes on in the fall, that dust warms up and you smell it.
- Clean them when the heat is off and the radiator is cool.
- Use a long, thin radiator brush or a vacuum crevice tool to pull dust out from between the sections.
- Lay an old towel underneath first; dust will fall.
- Wipe the outside with a damp cloth. Skip abrasive pads, which scratch painted finishes.
Doing this once in early fall, before the first cold night, cuts down on that burning-dust smell.
Plaster walls
Plaster is harder than drywall but doesn't like being soaked. Paint on old plaster may also be many layers thick.
- Dust walls with a dry microfiber mop or cloth first.
- For marks, use a barely damp cloth with a drop of mild dish soap, and dry the spot right after.
- Avoid magic erasers on flat or older paint; they can take the finish off with the mark.
Hairline cracks are normal in old plaster. Wipe gently around them rather than across them.
Original hardwood floors
Old hardwood may have a modern polyurethane finish, or an older wax or shellac finish. Water and steam are hard on both.
- Vacuum or dry-mop first to pick up grit; grit is what scratches floors.
- Damp-mop with a well-wrung mop and a cleaner made for wood floors. Never leave standing water.
- Don't use steam mops on old wood. Heat and moisture can lift the finish and swell the boards.
- If water beads on the surface, it's likely sealed. If a drop darkens the wood, it isn't; keep cleaning dry.
Vintage bathroom tile
Small hex floor tile and old subway tile often have grout that was never sealed, or was sealed decades ago.
- Use a pH-neutral or mildly alkaline cleaner. Acidic cleaners, including vinegar, slowly eat away at old grout and can etch marble.
- Scrub grout with a soft or medium brush, not a wire brush.
- Rinse well and dry. Leftover cleaner attracts dirt.
Basements
Stone and block foundations let moisture through, so many Pittsburgh basements smell musty, especially in summer.
- Run a dehumidifier in humid months. Cleaning won't fix a moisture problem on its own.
- Vacuum floors and walls with a HEPA vacuum rather than sweeping, which throws dust into the air.
- Clean visible mildew spots on hard surfaces with a mild detergent solution and let them dry fully. Larger areas of mold, or any that keeps coming back, are a job for a moisture or remediation specialist.
A note on lead paint
Homes built before 1978 may have lead-based paint under newer layers. Normal cleaning is safe, but avoid dry sanding, scraping or power-washing painted surfaces. Wipe window sills and floors near old windows with a damp cloth, and use a HEPA vacuum. Window wells and sills are where paint dust collects.
Woodwork, built-ins and pocket doors
Original trim, built-in cabinets and pocket doors are often stained wood rather than painted. Dust them with a dry or barely damp cloth and dry them right away. Skip all-purpose sprays with strong solvents, which can dull old varnish.
Getting help
Our cleaners work in older homes across Pittsburgh every week. When you get your estimate, tell us about radiators, unsealed floors or anything delicate, and we'll note it for your cleaner. Our house cleaning covers kitchens, bathrooms, bedrooms and living areas with our own supplies, and a deep clean is the right first visit for a house that needs its trim, grout and fixtures caught up. See all the neighborhoods and towns we serve.